Rode NT2-A Studio Pack

Buy this
  • £269.00
  • 2 Left

The Rode NT2-A is the only microphone you'll ever need. You can be guaranteed total flexibility thanks to the inclusion of three polar patterns. These will suit your every want and need, providing the ideal choices for recording vocals, instruments, podcasts, interviews, and so much more.

The intuitive onboard interface allows you to choose between cardioid, fig.8 and omnidirectional. Cardioid provides you with a tight-focused sound. This is brilliant for when you're working in a busy environment as it guarantees excellent off-axis rejection, minimising the risk of unwanted noise and ambiences. Figure 8 is a great option for when you're recording multiple voices. Simply place one person on each side of the microphone and adjust their position in proximity to the microphone for optimised results. Omnidirectional mode provides a wholly natural sound, capturing every nuance of the space you're recording in. This is also brilliant for reducing proximity effect when close-mic'ing a source.

Get the sound right at source. The NT2-A also features two attenuation pads. These allow you to reduce the large diaphragm's sensitivity by 5 and 10dB. This will be highly useful when recording instruments such as drums, percussion, and guitar amps, which often have high SPLs. Thanks to inclusion of attenuation pads, you'll be able to capture loud sources at optimised levels, free from the risk of distortion and clipping.


Features
  • NT2-A Variable Pattern Condenser Microphone
  • SM6 shockmount with integrated Pop Shield
  • Dust Pouch
  • XLR Cable
  • Large 1" (25mm) HF1 gold sputtered capsule
  • On body control of polar pattern, HPF and PAD
  • Three position variable polar pattern - Omni, Cardioid or Figure 8
  • Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
  • Three position PAD - 0dB, -5dB or -10dB
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Internal capsule shock mounting
Specifications
  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Capsule: 1.00"
  • Polar Pattern: Cardioid, omnidirectional, fig. 8
  • Address Type: Side
  • Frequency Range: 20Hz - 20kHz
  • Output Impedance: 200Ω
  • Maximum SPL: 147dBSPL
  • Maximum Output Level: 16.0mV (@ 1kHz, 1% THD into 1KΩ load)
  • Sensitivity: -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Equivalent Noise Level (A-weighted): 7dBA
  • Power Options: +24V phantom power+48V phantom power
  • Weight: 860.00g
  • Dimensions: 209.00mmH x 55.00mmW x 55.00mmD
  • Output: XLR Output
  • Warranty: 1 year with free extension to 10 years following registration here
  • Product Code: NT2APACK